1000GL Fully Hydraulic Core Exploration Drilling Rig

PRODUCT PARAMETERS

Product Descriptions： The MX1000GL fully hydraulic core exploration drilling rig is a high-performance, deep-hole exploration drilling rig with fully hydraulic transmission technology, designed for complex deep drilling operations such as mineral exploration, geological survey, engineering exploration and so on. With strong power, efficient drilling capacity and excellent stability, this equipment is suitable for hard rock, sand layer, pebble layer and other geological conditions.

REQUEST A QUOTE

Description

FAQs

Request A Quote

Description

Product Features

Strong power system
Equipped with turbocharged diesel engine, it has strong power and can work continuously for a long time with high load.
Full hydraulic transmission, strong torque output, suitable for deep hard rock drilling.
Full hydraulic control system
Full hydraulic transmission control, flexible and easy to operate, greatly reducing labor intensity.
Independent hydraulic oil pump system, reasonable power distribution, low maintenance cost.
Hydraulic cooling system prevents high oil temperature and prolongs the service life of the equipment.
High-efficiency drilling capacity
Maximum drilling depth: 1000 meters
Maximum drilling diameter: 400mm
Suitable for rock, mud layer, sand layer and other complex geological environments
Dual system options:
Air power system (with air compressor)
Mud pump system (with mud pump)
Drilling tower and lifting system
Hydraulic lifting drilling tower, adopting double cylinders hydraulic lifting, higher stability.
The drilling tower can be adjusted in height to adapt to different depth drilling.
Made of high-strength steel, with excellent durability and impact resistance.
Crawler chassis
Crawler chassis design, strong off-road performance, can adapt to the operation of harsh terrain.
Strong loading capacity, wide track, less damage to hard ground.
Safety and maintenance design
Thickened hydraulic oil pipe protection sleeve, prolonging the service life of oil pipe.
Automatic hydraulic outriggers, quickly stabilize the equipment and improve operational safety.
Centralized operation panel, easy to control and maintain.

Product Advantage
Strong deep hole drilling ability: it can reach a depth of 1000 meters, suitable for deep mineral exploration.
Strong power: turbocharged diesel engine + full hydraulic drive, stable power output.
Efficient operation: fast response of hydraulic system, suitable for long time high load operation.
Stable and durable: thickened crawler chassis and hydraulic drilling tower ensure the stability and durability of the equipment.
Safe and reliable: full hydraulic control system and automatic outriggers enhance operational safety.
Strong adaptability: suitable for a variety of complex geological environments.

Applicable fields
Mineral exploration: metal mine, non-metal mine, coal mine resource exploration
Hydrogeological survey: water well drilling, geothermal well drilling
Engineering exploration: railroad, highway, bridge and other basic engineering exploration
Geological research: deep core sampling and geological structure analysis

Product Parameters

parameters	MX1000GL Fully Hydraulic Core Exploration Drilling Rig
Maximum drilling depth	1000m
Maximum drilling diameter	400mm
Maximum torque of power head	13500N·m
Power head speed	0-150rpm（Three-level adjustment）
engine power	220kW Turbocharged Diesel Engine
Hydraulic system pressure	45MPa
Push cylinder stroke	4.5米
diameter of drill pipe	89mm / 102mm / 114mm
Chassis type	Crawler chassis
Weight	13500kg
climbing ability	≤35°
Hydraulic oil tank capacity	450L
Operating Temperature Range	-15℃ – +50℃

FAQs

What types of products can we offer?

1.Water Well Drilling Rig

Applications: Designed for drilling water wells in various geological conditions (soft soil, sand, gravel, and hard rock).
Features:
- Compatible with air compressors or mud pumps for efficient drilling in diverse terrains.
- High mobility with trailer/truck-mounted configurations for remote site access.
- Typical drilling depth: 100–500 meters, adaptable to regional requirements.
Advantages: Energy-efficient, user-friendly controls, and modular design for easy maintenance.

2. Core Drilling Rig

Applications: Geological exploration (metal/non-metal mineral surveys), hydrogeological studies, and oil/gas field exploration.
Features:
- Rope coring technology for precise sample extraction.
- Hydraulic systems for stable operation in challenging environments.
- Drilling diameter: 50–150 mm; depth up to 1,000 meters.
Advantages: High core recovery rate, low vibration, and compatibility with wireline drilling systems.

3. DTH (Down-the-Hole) Drilling Rig

Applications: Ideal for hard rock formations in mining, quarrying, and geothermal projects.
Features:
- Pneumatic hammer drills for rapid penetration.
- Adjustable air pressure (1.7–3.5 MPa) and customizable hole diameters (102–114 mm).
- Supports depths up to 300 meters.
Advantages: Reduced deviation, high drilling speed, and minimal wear on tools.

4. HDD (Horizontal Directional Drilling) Rig

Applications: Underground pipeline/utility installation without trenching, suitable for urban areas and river crossings.
Features:
- GPS-guided steering systems for precision.
- Torque capacity: 10,000–30,000 Nm; pullback force up to 200 tons.
- Drilling length: 100–2,000 meters.
Advantages: Environmentally friendly, minimal surface disruption, and adaptable to varying soil types.

5. Excavator Mounted Drilling Rig

Applications:

Mining and Quarry Drilling:Efficient for blast hole drilling in open-pit mines, quarries, and aggregate extraction sites.

Slope Stabilization and Anchoring:Ideal for drilling anchor holes on slopes, embankments, and landslide-prone areas to install rock bolts and soil nails.

Foundation and Piling Work：Used for drilling foundation holes in urban construction, bridges, retaining walls, and infrastructure projects.

Feature:Easily converts your excavator into a powerful and flexible drilling rig for rock, soil, and foundation applications.

Key Selling Points:

Compliance: Meets international standards (ISO, CE) and adapts to local regulations (e.g., EU VAT, environmental policies).

Customization: Tailored configurations (e.g., crawler/wheel-mounted) to meet project-specific needs .

After-Sales Support: 24/7 technical assistance, regional service centers, and extended warranty options .

What logistics do we ship through?

We offer high-efficiency logistics solutions and secure delivery of heavy-duty drilling equipment. Here’s how we handle shipments:

Support EXW, FOB, CIF, DDP, etc., tailored to your needs.

Transportation Options

Sea Freight: Cost-effective for large machines (e.g., rigs exceeding 10 tons). Suitable for long-distance international shipments. Delivery time: 25–45 days1.

Air Freight: Fast-track delivery for urgent orders or spare parts. Delivery time: 3–10 days1.

Land Freight: Ideal for regional deliveries (e.g., within Asia or Europe). Includes truck or rail transport.

Multimodal Solutions: Combined sea/air/land transport for optimized cost and efficiency.

Packaging & Safety

Heavy machinery is securely packed with steel frames, weatherproof wooden crates, and anti-rust treatments1.

Fragile components (e.g., hydraulic systems) are individually padded and labeled.

Customs & Documentation

We provide full export documentation (commercial invoice, packing list, COO, etc.) and assist with customs clearance globally.

Delivery Assurance

Real-time tracking: Monitor shipments via our logistics platform.

Insurance coverage: Optional all-risk insurance for high-value equipment.

Flexible Trade Terms

Can it be customized as per our requirements?

MX843B One-piece open-pit drilling truck

Yes, mechanical equipment can be fully customized to meet your specific requirements. Here’s a structured overview:

1. Customization Scope

Functional Adaptations: Tailored to your operational needs (e.g., power output, precision, automation level) .
Design Modifications: Adjustments in size, material, and ergonomic layout to fit your workspace.
Integration Capabilities: Compatibility with existing systems (e.g., IoT sensors, production line interfaces).

2. Key Benefits

Optimized Efficiency: Custom designs align with your workflow, reducing downtime and energy waste.
Cost Savings: Eliminate unnecessary features while prioritizing critical functionalities.
Competitive Edge: Unique equipment enhances product quality and differentiation in your market.

3. Process Overview

Consultation: Detailed analysis of your needs and operational environment.
Prototyping: 3D modeling and testing to validate design feasibility.
Production: Advanced manufacturing techniques (e.g., CNC machining, laser cutting) ensure precision.
Post-Sale Support: Installation, training, and maintenance services included.

4. Industries Served

Heavy machinery, automotive, aerospace, and precision engineering sectors.

For a tailored solution, collaborate with a specialized manufacturer to discuss technical specifications and project timelines. Let us know your requirements—we’ll handle the rest!