MX600 Fully Hydraulic Core Exploration Drilling Rig

PRODUCT PARAMETERS

Product Description： MX600 Full Hydraulic Core Exploration Drilling Rig is a highly efficient deep hole drilling equipment designed for mineral exploration, geological survey, engineering exploration and other needs. The equipment adopts full hydraulic drive and crawler chassis, which has strong power output, high efficient drilling capacity and superior stability, and can adapt to complex geological conditions and a variety of drilling operations.

REQUEST A QUOTE

Description

FAQs

Request A Quote

Description

Product Features

Powerful power system

Equipped with turbocharged diesel engine, strong power, adapt to long time and high intensity drilling operation.
Hydraulic system drive, high torque, high drilling efficiency.

Full hydraulic control system
Adopt full hydraulic transmission control, flexible and easy to maneuver.
The hydraulic oil pump is independently designed to ensure balanced power distribution and reduce maintenance cost.
Hydraulic oil cooling system effectively prevents high oil temperature and prolongs the service life of the equipment.
High-efficiency drilling capacity
Maximum drilling depth: 600 meters
Maximum drilling diameter: 350mm
Suitable for hard rock, sand layer, pebble layer and other complex geological conditions.
Optional dual system is available:
Air power system (with air compressor)
Mud pump system (with mud pump)
High strength drilling tower structure
Composite hydraulic drilling tower design, adopting double-cylinder hydraulic lifting system, high stability of drilling tower.
The drilling tower lifts smoothly, suitable for deep hole drilling operation, and easy for transportation and installation.
Crawler chassis
Professional engineering crawler chassis with strong off-road performance, suitable for complex terrain operation.
Wide chain plate, less damage to hard road surface, and good carrying capacity.
Safety and maintenance design
Each hydraulic oil pipe is equipped with thickened protective sleeve to enhance durability.
Equipped with automatic hydraulic legs, which can quickly stabilize the equipment during operation and ensure safety.
The operation panel is centralized control, convenient maintenance.

Product Advantages

Strong power: high-power turbocharged engine, stable and reliable power output.
Full hydraulic drive: precise and sensitive hydraulic control, high operating efficiency.
Wide adaptability: it can drill under a variety of complex geological conditions, suitable for mineral exploration, water well drilling and other engineering needs.
Stable and durable: professional crawler chassis and high-strength drilling tower structure ensure the stability and durability of the equipment.
Convenient maintenance: modularized design, simple maintenance and reduced downtime.

Applicable fields

Mineral exploration: metal ore, non-metal ore and other mineral resources exploration
Hydrogeological exploration: deep water wells, geothermal wells, drinking water wells drilling
Engineering exploration: railroad, highway, bridge, building foundation exploration
Scientific research: stratigraphic sampling, core sample collection

Technical Parameters

FAQs

What types of products can we offer?

1.Water Well Drilling Rig

Applications: Designed for drilling water wells in various geological conditions (soft soil, sand, gravel, and hard rock).
Features:
- Compatible with air compressors or mud pumps for efficient drilling in diverse terrains.
- High mobility with trailer/truck-mounted configurations for remote site access.
- Typical drilling depth: 100–500 meters, adaptable to regional requirements.
Advantages: Energy-efficient, user-friendly controls, and modular design for easy maintenance.

2. Core Drilling Rig

Applications: Geological exploration (metal/non-metal mineral surveys), hydrogeological studies, and oil/gas field exploration.
Features:
- Rope coring technology for precise sample extraction.
- Hydraulic systems for stable operation in challenging environments.
- Drilling diameter: 50–150 mm; depth up to 1,000 meters.
Advantages: High core recovery rate, low vibration, and compatibility with wireline drilling systems.

3. DTH (Down-the-Hole) Drilling Rig

Applications: Ideal for hard rock formations in mining, quarrying, and geothermal projects.
Features:
- Pneumatic hammer drills for rapid penetration.
- Adjustable air pressure (1.7–3.5 MPa) and customizable hole diameters (102–114 mm).
- Supports depths up to 300 meters.
Advantages: Reduced deviation, high drilling speed, and minimal wear on tools.

4. HDD (Horizontal Directional Drilling) Rig

Applications: Underground pipeline/utility installation without trenching, suitable for urban areas and river crossings.
Features:
- GPS-guided steering systems for precision.
- Torque capacity: 10,000–30,000 Nm; pullback force up to 200 tons.
- Drilling length: 100–2,000 meters.
Advantages: Environmentally friendly, minimal surface disruption, and adaptable to varying soil types.

5. Excavator Mounted Drilling Rig

Applications:

Mining and Quarry Drilling:Efficient for blast hole drilling in open-pit mines, quarries, and aggregate extraction sites.

Slope Stabilization and Anchoring:Ideal for drilling anchor holes on slopes, embankments, and landslide-prone areas to install rock bolts and soil nails.

Foundation and Piling Work：Used for drilling foundation holes in urban construction, bridges, retaining walls, and infrastructure projects.

Feature:Easily converts your excavator into a powerful and flexible drilling rig for rock, soil, and foundation applications.

Key Selling Points:

Compliance: Meets international standards (ISO, CE) and adapts to local regulations (e.g., EU VAT, environmental policies).

Customization: Tailored configurations (e.g., crawler/wheel-mounted) to meet project-specific needs .

After-Sales Support: 24/7 technical assistance, regional service centers, and extended warranty options .

What logistics do we ship through?

We offer high-efficiency logistics solutions and secure delivery of heavy-duty drilling equipment. Here’s how we handle shipments:

Support EXW, FOB, CIF, DDP, etc., tailored to your needs.

Transportation Options

Sea Freight: Cost-effective for large machines (e.g., rigs exceeding 10 tons). Suitable for long-distance international shipments. Delivery time: 25–45 days1.

Air Freight: Fast-track delivery for urgent orders or spare parts. Delivery time: 3–10 days1.

Land Freight: Ideal for regional deliveries (e.g., within Asia or Europe). Includes truck or rail transport.

Multimodal Solutions: Combined sea/air/land transport for optimized cost and efficiency.

Packaging & Safety

Heavy machinery is securely packed with steel frames, weatherproof wooden crates, and anti-rust treatments1.

Fragile components (e.g., hydraulic systems) are individually padded and labeled.

Customs & Documentation

We provide full export documentation (commercial invoice, packing list, COO, etc.) and assist with customs clearance globally.

Delivery Assurance

Real-time tracking: Monitor shipments via our logistics platform.

Insurance coverage: Optional all-risk insurance for high-value equipment.

Flexible Trade Terms

Can it be customized as per our requirements?

MX843B One-piece open-pit drilling truck

Yes, mechanical equipment can be fully customized to meet your specific requirements. Here’s a structured overview:

1. Customization Scope

Functional Adaptations: Tailored to your operational needs (e.g., power output, precision, automation level) .
Design Modifications: Adjustments in size, material, and ergonomic layout to fit your workspace.
Integration Capabilities: Compatibility with existing systems (e.g., IoT sensors, production line interfaces).

2. Key Benefits

Optimized Efficiency: Custom designs align with your workflow, reducing downtime and energy waste.
Cost Savings: Eliminate unnecessary features while prioritizing critical functionalities.
Competitive Edge: Unique equipment enhances product quality and differentiation in your market.

3. Process Overview

Consultation: Detailed analysis of your needs and operational environment.
Prototyping: 3D modeling and testing to validate design feasibility.
Production: Advanced manufacturing techniques (e.g., CNC machining, laser cutting) ensure precision.
Post-Sale Support: Installation, training, and maintenance services included.

4. Industries Served

Heavy machinery, automotive, aerospace, and precision engineering sectors.

For a tailored solution, collaborate with a specialized manufacturer to discuss technical specifications and project timelines. Let us know your requirements—we’ll handle the rest!