Zhengzhou Manxing Machinery Equipment Co., Ltd.
PRODUCT PARAMETERS
Description
- Main Features:
Strong power: adopts turbocharged diesel engine of famous brand to ensure the efficient operation of the equipment under various complex geological conditions.
Hydraulic system: advanced hydraulic system design, using imported hydraulic oil pumps, parallel gear box design, to provide sufficient and reasonable power distribution, simple maintenance, low cost.
Traveling device: equipped with new type traveling motor and reducer, long service life, easy to move, adapt to a variety of complex terrain.
Chassis structure: It adopts professional excavator crawler chassis, which is sturdy and durable, with heavy load-bearing, moderate width of chain plate, and little damage to hard road surface.
Lifting device: designed with composite big arm, small size, long stroke, double cylinder lifting, large lifting tonnage to ensure the stability and safety of the drilling process.
Protection measures: each hydraulic oil pipe is covered with thickened protection sleeve to prolong the service life of the oil pipe; the big arm is equipped with a limit device to protect the oil cylinder and ensure the safety of work.
Versatility: dual system configuration can be added as needed.
Air power system: with air compressor, suitable for air drilling process.
Mud pump system: with mud pump, suitable for mud drilling process.
2.Scope of application:
Water well drilling: applicable to the drilling of domestic water wells and industrial water wells in rural and urban areas.
Geological exploration: it can be used for geological core drilling, physical survey and so on.
Agricultural irrigation: applicable to the drilling of farmland irrigation wells to meet agricultural water demand.
Engineering construction: It is suitable for engineering geological investigation of railroad, hydropower, transportation, bridge, dam foundation and other buildings.
3. Precautions:
Operation training: It is recommended that the operators receive professional training and familiarize themselves with the operation regulations of the equipment to ensure safe and efficient operation.
Regular maintenance: check and maintain the equipment regularly according to the maintenance manual provided by the manufacturer to ensure long-term stable operation of the equipment.
Selection of accessories: Use original accessories to ensure the performance and safety of the equipment and prolong the service life of the equipment.
4. Product Parameters:
| MX 180Water Well Drilling Rig | |||
| The weight（T） | 5.2 | Drill pipe diameter（mm） | Φ76 Φ89 |
| The hole diameter（mm） | 140-254 | Drill pipe length（m） | 1.5m 2.0m 3.0m |
| Drilling depth（m） | 180 | Rig lifting force（T） | 12 |
| One-time advance length（m） | 3.3 | Rapid rise speed（m/min） | 20 |
| Walking speed（km/h） | 2.5 | Fast feeding speed（m/min） | 40 |
| Climbing angles（Max.） | 30 | Width of loading（m） | 2.4 |
| Equipped capacitor（kw） | 60 | Hoisting force of winch（T） | —- |
| Using air pressure（MPA） | 1.7-2.5 | Swing torque（N.m） | 3200-4600 |
| Air consumption（m³/min） | 17-31 | Dimension（mm） | 4000×1630×2250 |
| Swing speed（rpm） | 45-70 | Equipped with hammer | Medium and high wind pressure series |
| The penetration efficiency（m/h） | 10-35 | High leg stroke（m） | 1.4 |
| The engine brand | Yuchai engine | ||
FAQs
What types of products can we offer?
- Applications: Designed for drilling water wells in various geological conditions (soft soil, sand, gravel, and hard rock).
- Features:
- Compatible with air compressors or mud pumps for efficient drilling in diverse terrains.
- High mobility with trailer/truck-mounted configurations for remote site access.
- Typical drilling depth: 100–500 meters, adaptable to regional requirements.
- Advantages: Energy-efficient, user-friendly controls, and modular design for easy maintenance.
- Applications: Geological exploration (metal/non-metal mineral surveys), hydrogeological studies, and oil/gas field exploration.
- Features:
- Rope coring technology for precise sample extraction.
- Hydraulic systems for stable operation in challenging environments.
- Drilling diameter: 50–150 mm; depth up to 1,000 meters.
- Advantages: High core recovery rate, low vibration, and compatibility with wireline drilling systems.
3. DTH (Down-the-Hole) Drilling Rig
- Applications: Ideal for hard rock formations in mining, quarrying, and geothermal projects.
- Features:
- Pneumatic hammer drills for rapid penetration.
- Adjustable air pressure (1.7–3.5 MPa) and customizable hole diameters (102–114 mm).
- Supports depths up to 300 meters.
- Advantages: Reduced deviation, high drilling speed, and minimal wear on tools.
4. HDD (Horizontal Directional Drilling) Rig
- Applications: Underground pipeline/utility installation without trenching, suitable for urban areas and river crossings.
- Features:
- GPS-guided steering systems for precision.
- Torque capacity: 10,000–30,000 Nm; pullback force up to 200 tons.
- Drilling length: 100–2,000 meters.
- Advantages: Environmentally friendly, minimal surface disruption, and adaptable to varying soil types.
5. Excavator Mounted Drilling Rig
- Applications:
Mining and Quarry Drilling:Efficient for blast hole drilling in open-pit mines, quarries, and aggregate extraction sites.
Slope Stabilization and Anchoring:Ideal for drilling anchor holes on slopes, embankments, and landslide-prone areas to install rock bolts and soil nails.
Foundation and Piling Work：Used for drilling foundation holes in urban construction, bridges, retaining walls, and infrastructure projects.
- Feature:Easily converts your excavator into a powerful and flexible drilling rig for rock, soil, and foundation applications.
Key Selling Points:
Compliance: Meets international standards (ISO, CE) and adapts to local regulations (e.g., EU VAT, environmental policies).
Customization: Tailored configurations (e.g., crawler/wheel-mounted) to meet project-specific needs .
After-Sales Support: 24/7 technical assistance, regional service centers, and extended warranty options .
What logistics do we ship through?
We offer high-efficiency logistics solutions and secure delivery of heavy-duty drilling equipment. Here’s how we handle shipments:
Support EXW, FOB, CIF, DDP, etc., tailored to your needs.
Transportation Options
Sea Freight: Cost-effective for large machines (e.g., rigs exceeding 10 tons). Suitable for long-distance international shipments. Delivery time: 25–45 days1.
Air Freight: Fast-track delivery for urgent orders or spare parts. Delivery time: 3–10 days1.
Land Freight: Ideal for regional deliveries (e.g., within Asia or Europe). Includes truck or rail transport.
Multimodal Solutions: Combined sea/air/land transport for optimized cost and efficiency.
Packaging & Safety
Heavy machinery is securely packed with steel frames, weatherproof wooden crates, and anti-rust treatments1.
Fragile components (e.g., hydraulic systems) are individually padded and labeled.
Customs & Documentation
We provide full export documentation (commercial invoice, packing list, COO, etc.) and assist with customs clearance globally.
Delivery Assurance
Real-time tracking: Monitor shipments via our logistics platform.
Insurance coverage: Optional all-risk insurance for high-value equipment.
Flexible Trade Terms
Can it be customized as per our requirements?
Yes, mechanical equipment can be fully customized to meet your specific requirements. Here’s a structured overview:
1. Customization Scope
- Functional Adaptations: Tailored to your operational needs (e.g., power output, precision, automation level) .
- Design Modifications: Adjustments in size, material, and ergonomic layout to fit your workspace.
- Integration Capabilities: Compatibility with existing systems (e.g., IoT sensors, production line interfaces).
2. Key Benefits
- Optimized Efficiency: Custom designs align with your workflow, reducing downtime and energy waste.
- Cost Savings: Eliminate unnecessary features while prioritizing critical functionalities.
- Competitive Edge: Unique equipment enhances product quality and differentiation in your market.
3. Process Overview
- Consultation: Detailed analysis of your needs and operational environment.
- Prototyping: 3D modeling and testing to validate design feasibility.
- Production: Advanced manufacturing techniques (e.g., CNC machining, laser cutting) ensure precision.
- Post-Sale Support: Installation, training, and maintenance services included.
4. Industries Served
- Heavy machinery, automotive, aerospace, and precision engineering sectors.
For a tailored solution, collaborate with a specialized manufacturer to discuss technical specifications and project timelines. Let us know your requirements—we’ll handle the rest!
