Zhengzhou Manxing Machinery Equipment Co., Ltd.
PARÁMETROS DEL PRODUCTO
Descripción
1. Potente motor y sistema de compresión de aire
- Equipado con un motor diesel de alta potencia ofreciendo un rendimiento confiable para operaciones continuas.
- Integrado compresor de aire de tornillo garantiza un flujo de aire óptimo para la eficiencia del martillo DTH, reduciendo el consumo de combustible y mejorando la productividad.
2. Sistema de perforación DTH de alta eficiencia
- Adecuado para vertical, inclined, and horizontal drillingIdeal para perforaciones de voladura y pre-división.
- Capacidad de orificios de gran diámetro que van desde Φ90mm to Φ203mm.
- Proporciona alta energía de impacto para velocidades de penetración más rápidas, incluso en formaciones de roca dura.
3. Sistema hidráulico avanzado
- Sistema de control totalmente hidráulico para mayor precisión y seguridad.
- Bombas hidráulicas independientes Garantizar una distribución de potencia optimizada para las funciones de rotación, alimentación y auxiliares.
- Motores hidráulicos Eaton Prolongar la vida útil con un mantenimiento mínimo.
4. Diseño estructural robusto
- Viga de alimentación de acero reforzado Diseñado para agujeros de gran diámetro, ofreciendo estabilidad y eficiencia.
- Chasis de orugas de acero estilo Caterpillar for superior stability and mobility on rough terrains.
- Patas de gato nivelador hidráulico ensure steady positioning during drilling operations.
5. Supresión y filtración de polvo
- Sistema de filtración de aire de dos etapas and a colector de polvo de alta eficiencia Minimizar el polvo en el aire, mejorando la seguridad y la protección del medio ambiente.
- Gran capacidad Filtros de polvo de 14 núcleos Optimice el rendimiento de eliminación de polvo en entornos hostiles.
6. Sistemas rotacionales y de alimentación
- Heavy-duty rotary head powered by Motores hidráulicos Eaton with multi-bearing support for enhanced durability.
- Adjustable feed pressure and rotation speed for varying rock conditions.
7. Operator Safety and Comfort
- Ergonomic cabin design con aire acondicionado y funciones de reducción de ruido.
- Panel de control centralizado para operaciones simplificadas y seguras.
- Automatic rod handling system reduces manual labor and enhances productivity.
Applications
- Surface Mining: Ideal for blast hole drilling in open-pit mines.
- Quarrying: Effective for aggregate production and stone extraction.
- Proyectos de construcción: Adecuado para construcción de presas, perforación de cimientos y túneles.
- Perforación de pozos geotérmicos y de agua: Capaz en formaciones rocosas profundas y duras.
Ventajas del producto
Diseño integrado: Combina plataforma de perforación y compresor de aire en una unidad compacta.
Alta eficiencia: Penetración rápida con potente rendimiento de perforación DTH.
Construcción resistente: Construido para condiciones extremas.
Respetuoso del medio ambiente: Supresión avanzada de polvo y componentes de bajo consumo de combustible.
Centrado en el operador: Espacio de trabajo seguro y cómodo con controles simplificados.
Especificaciones técnicas
| Parámetro | Valor |
|---|---|
| Diámetro de perforación | Φ90mm – Φ203mm |
| Profundidad máxima de perforación | 40 metros |
| Potencia del motor | Motor diésel de 180 kW |
| Capacidad del compresor | 18 m³/min – 24 m³/min |
| Presión del compresor | 1.7 MPa – 2.4 MPa |
| Fuerza de alimentación | 25 kN |
| Par de rotación | 4500 N·m |
| Tipo de chasis de pista | Orugas de acero de alta resistencia |
| Capacidad de escalada | 25° |
| Sistema de recolección de polvo | Filtro de doble etapa de 14 núcleos |
| Peso de la máquina | 14,000 kg |
| Dimensiones de transporte | 7500mm × 2300mm × 2900mm |
FAQs
¿Qué tipos de productos podemos ofrecer?
- Applications: Designed for drilling water wells in various geological conditions (soft soil, sand, gravel, and hard rock).
- Features:
- Compatible with air compressors or mud pumps for efficient drilling in diverse terrains.
- High mobility with trailer/truck-mounted configurations for remote site access.
- Typical drilling depth: 100–500 meters, adaptable to regional requirements.
- Advantages: Energy-efficient, user-friendly controls, and modular design for easy maintenance.
- Applications: Geological exploration (metal/non-metal mineral surveys), hydrogeological studies, and oil/gas field exploration.
- Features:
- Rope coring technology for precise sample extraction.
- Hydraulic systems for stable operation in challenging environments.
- Drilling diameter: 50–150 mm; depth up to 1,000 meters.
- Advantages: High core recovery rate, low vibration, and compatibility with wireline drilling systems.
3. DTH (Down-the-Hole) Drilling Rig
- Applications: Ideal for hard rock formations in mining, quarrying, and geothermal projects.
- Features:
- Pneumatic hammer drills for rapid penetration.
- Adjustable air pressure (1.7–3.5 MPa) and customizable hole diameters (102–114 mm).
- Supports depths up to 300 meters.
- Advantages: Reduced deviation, high drilling speed, and minimal wear on tools.
4. HDD (Horizontal Directional Drilling) Rig
- Applications: Underground pipeline/utility installation without trenching, suitable for urban areas and river crossings.
- Features:
- GPS-guided steering systems for precision.
- Torque capacity: 10,000–30,000 Nm; pullback force up to 200 tons.
- Drilling length: 100–2,000 meters.
- Advantages: Environmentally friendly, minimal surface disruption, and adaptable to varying soil types.
5. Excavator Mounted Drilling Rig
- Applications:
Mining and Quarry Drilling:Efficient for blast hole drilling in open-pit mines, quarries, and aggregate extraction sites.
Slope Stabilization and Anchoring:Ideal for drilling anchor holes on slopes, embankments, and landslide-prone areas to install rock bolts and soil nails.
Foundation and Piling Work：Used for drilling foundation holes in urban construction, bridges, retaining walls, and infrastructure projects.
- Feature:Easily converts your excavator into a powerful and flexible drilling rig for rock, soil, and foundation applications.
Key Selling Points:
Compliance: Meets international standards (ISO, CE) and adapts to local regulations (e.g., EU VAT, environmental policies).
Customization: Tailored configurations (e.g., crawler/wheel-mounted) to meet project-specific needs .
After-Sales Support: 24/7 technical assistance, regional service centers, and extended warranty options .
¿A través de qué logística realizamos los envíos?
We offer high-efficiency logistics solutions and secure delivery of heavy-duty drilling equipment. Here’s how we handle shipments:
Support EXW, FOB, CIF, DDP, etc., tailored to your needs.
Transportation Options
Sea Freight: Cost-effective for large machines (e.g., rigs exceeding 10 tons). Suitable for long-distance international shipments. Delivery time: 25–45 days1.
Air Freight: Fast-track delivery for urgent orders or spare parts. Delivery time: 3–10 days1.
Land Freight: Ideal for regional deliveries (e.g., within Asia or Europe). Includes truck or rail transport.
Multimodal Solutions: Combined sea/air/land transport for optimized cost and efficiency.
Packaging & Safety
Heavy machinery is securely packed with steel frames, weatherproof wooden crates, and anti-rust treatments1.
Fragile components (e.g., hydraulic systems) are individually padded and labeled.
Customs & Documentation
We provide full export documentation (commercial invoice, packing list, COO, etc.) and assist with customs clearance globally.
Delivery Assurance
Real-time tracking: Monitor shipments via our logistics platform.
Insurance coverage: Optional all-risk insurance for high-value equipment.
Flexible Trade Terms
¿Se puede personalizar según nuestros requisitos?
Yes, mechanical equipment can be fully customized to meet your specific requirements. Here’s a structured overview:
1. Customization Scope
- Functional Adaptations: Tailored to your operational needs (e.g., power output, precision, automation level) .
- Design Modifications: Adjustments in size, material, and ergonomic layout to fit your workspace.
- Integration Capabilities: Compatibility with existing systems (e.g., IoT sensors, production line interfaces).
2. Key Benefits
- Optimized Efficiency: Custom designs align with your workflow, reducing downtime and energy waste.
- Cost Savings: Eliminate unnecessary features while prioritizing critical functionalities.
- Competitive Edge: Unique equipment enhances product quality and differentiation in your market.
3. Process Overview
- Consultation: Detailed analysis of your needs and operational environment.
- Prototyping: 3D modeling and testing to validate design feasibility.
- Production: Advanced manufacturing techniques (e.g., CNC machining, laser cutting) ensure precision.
- Post-Sale Support: Installation, training, and maintenance services included.
4. Industries Served
- Heavy machinery, automotive, aerospace, and precision engineering sectors.
For a tailored solution, collaborate with a specialized manufacturer to discuss technical specifications and project timelines. Let us know your requirements—we’ll handle the rest!
